Reverse Osmosis
SYS-01High-recovery RO skids for process water and boiler feed, engineered around your feed analysis.
- Typical duty
- 5–100 m³/hr
- Recovery
- 60–75%
Systems / Technologies
Six treatment trains, engineered to your water
Every system here is designed, fabricated and commissioned by ENE Fluidtek — sized from your feed water analysis rather than a catalogue plate. Follow any of them into the detail.
Demineralisation
SYS-02Two-bed and mixed-bed DM plants for high-purity process and utility water.
- Type
- Two-bed / mixed-bed
- Regeneration
- 4% HCl / NaOH
Water Softener
SYS-03Single and twin softeners to protect boilers and CIP from hardness.
- Vessel
- 1000–1400mm
- Media
- Ion-exchange resin
Media Filter
SYS-04Pressure sand and multi-grade filters for turbidity and iron reduction ahead of RO.
- Typical duty
- 10–80 m³/hr
- Media
- Sand / anthracite
Iron Removal
SYS-05Aeration-cum-filtration units for borewell feed with dissolved iron.
- Feed Fe
- up to 8 mg/L
- Effluent
- <0.3 mg/L
Dosing System
SYS-06Chemical dosing skids for antiscalant, coagulant and pH correction.
- Pumps
- 2x metering
- Calibration
- Column option
Rarely one train, usually a
sequence
A real plant is a chain: filtration and softening protect the membranes, dosing holds the chemistry, and the RO or DM delivers the quality your process needs. We design the whole chain, not a single box.
Pretreatment
Media filtration and iron removal clean the feed; softening pulls the hardness that would scale the stages downstream.
Chemistry
Dosing systems meter antiscalant, coagulant and pH correction so the treatment stages see the water they were designed for.
Separation
RO or demineralisation delivers the final quality, monitored and cleaned on condition rather than on a calendar.